Your Location» GLOBAL

P-841C

VDSL Point-to-Point Solution (QAM 2-band, IP-based VDSL Central Office Modem)

VDSL, the fastest offering of DSL, provides much higher bandwidth than other DSL technologies. Ethernet over VDSL extends Ethernet over single-pair copper wiring at distances of up to 1.5km. ZyXEL's VDSL point-to-point solution is comprised of the P-841CPE modem and the Prestige 841C central side modem. This solution makes higher bandwidth leased-line application and LAN-to-LAN connectivity simple and easy. New revenue is possible with minimum installation time and expense. It proves to be a promising technology and revenue generation tool for service providers.
Buscador de Productos
 

Bandwidth of 5 to 15Mbps over Existing Telephone Wire
VDSL provides much higher bandwidth than other DSL technologies, and thus enables services providers to offer a variety of value-added services ranging from broadband Internet access to bandwidth-consuming video applications over existing telephone wires.

Both Symmetric and Asymmetric Applications
The bandwidth could be configured as either symmetric or asymmetric to address the requirements for different applications. Configuration only needs to be done at the P-841C side. The Prestige 841 follows the configuration of the P-841C.

Revenue Generation with Minimum Cost
The P-841/P-841C pair allows service providers to offer point-to-point service for, such as building-to-building connection or buildings with very small number of subscribers. New revenue could be generated with minimum installation time and expense.

 
 

Dimension

  • 181 mm (W) x 128 mm (D) x 30 mm (H)
  • Standalone box

VDSL Interface

  • One RJ-11 connector
  • Ethernet over VDSL
  • Transmission rate: 5, 10, 15Mbps for symmetric/asymmetric
  • Power back-off algorithm

GSTN Interface

  • One RJ-11 connector
  • POTS /ISDN splitter built-in

Ethernet Interface

  • One 10/100 Ethernet port
  • RJ-45 connector

Console Interface

  • One RS-232C port
  • DB-9 connector

LED and Switch

  • Power: Light on & off: System on or off
  • VDSL
    • Light on: Link on
    • Light off: link is down or no connection
  • Ethernet
    • Green light: 10M Ethernet
    • Orange light: 100M Ethernet
    • Light off: Ethernet not ready or failed
    • Light on: Ethernet link ok; color indicates if 10 or 100M LAN is on
    • Light flashing: Snd/Rcv
  • Power switch: for power on or off

System Control

  • Performance monitoring
    • Line rate
  • Configuration
    • VDSL line rate setting
  • Firmware upgrade from local console
  • Rate Adaptation

Network Protocols

  • IEEE 802.3/3u/3x
  • Flow control in full duplex mode
  • Back pressure in half duplex mode
  • Transparent bridging

Temperature

  • Operating: 0 ~ 50°C
  • Storage: -25 ~ 70°C

Humidity

  • 10 ~ 90% (non-condensing)

Power

  • 110V or 240VAC, 50 ~ 60Hz

Certification

  • Safety
    • UL1950
    • CSA C22.2 No. 950
    • EN60950, EN41003
    • JATE
  • EMC
    • FCC Part 15 Class B
    • VCCI Class B
    • EN55022 Class B
 
IR ARRIBA